Overview
Dulux Trade Evolve Matt is a high opacity, professional quality matt paint made with 35% recycled paint. It has a smooth application and quality finish. For use on all normal interior walls and ceilings, with excellent coverage at up to 17m2 per litre. Evolve Matt has a lower carbon footprint than other paints without losing the quality finish. This product is available in white.
- Made with 35% recycled paint
- High opacity
- Low carbon footprint
- Brush, roller, conventional or airless spray
Area | Interior |
Recommended Use | Normal interior walls and ceilings |
Base | Water-Based |
Coverage | Up to 17m² per litre |
Drying Time | Dependant on temperature and humidity |
Re-Coat Time | 2-4 Hours |
Recommended Coats | 1-2 Coats |
Application Method | Brush, Roller, Conventional Spray, Airless Spray |
VOC Levels | Low |
Clean Up | Remove as much paint as possible from the equipment before cleaning with water |
Preparation
For best results with Dulux Trade Evolve Matt, ensure that the surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry)
- Remove all loose and defective paint
- Wash the surface to remove dirt, grease and powdery or residues surfaces, rinse with clean water and allow to dry.
- Seal surfaces that remain powdery with an appropriate plaster sealer.
- Where neessary, rub down and wipe with a damp, lint free cloth to avoid dust.
- Any cracks and defects should be filled with an appropriate filler.
Application
We always recommend to perform a test patch on a small area of the surface to be painted to ensure you are happy with the finished results.
- Stir well before use. Do not apply in temperatures below 8°C
- Seal new surfaces with thinned Evolve Matt (1 part clean water to 5 parts paint)
- Generally two coats are required, however on painted surfaces that are in good condition in a similar colour, one coat may suffice
Conventional spray
- If thinning is required add up to 1 part clean water to 2.5 parts paint
Airless spray application
- If thinning is required add up to 1 part clean water to 5 parts paint
- For broadwall surfaces use a standard tip e.g. 517. For more complex surfaces consider using a fine finish/low pressure tip for best results
Note: Always follow the manufacturer's instructions found on the tin