Overview

Dulux Trade Quick Dry Satinwood is a water-based, durable satin finish ideal to use on interior wood and metal surfaces. Formulated with advanced technology, it is recoatable in 4-6 hours, offers a coverage up to 12m2 per litre and delivers a smooth, hardwearing topcoat, that can be used in interior spaces including kitchen and bathrooms.

Tough & durable
Mid-Sheen finish - ideal for interior wood and metal
Advanced water based technology
Self undercoating

Tinted Colour Information

Tinted paint is custom mixed in house at Next Day Paint using our Dulux tinting machine. We mix the paint on site, which means we can offer our usual fast delivery with no extra delay. Tinted Colour Match paints can't be cancelled or returned as they are tinted to order.

Area	Interior
Recommended Use	interior wood & metal
Base	Water-Based
Coverage	Up to 12m2 per litre
Drying Time	Dependent on temperature and humidity
Re-Coat Time	4-6 hours
Recommended Coats	2 Coats
Application Method	Brush, Roller or Sprayer
VOC Levels	Low
Clean Up	Remove as much product as possible from the equipment before cleaning with water

Preparation

Surfaces must be sound, clean, dry and correctly prepared (new surfaces particularly must be fully dry)

Thoroughly rub down previously painted surfaces, using ‘wet flatting’ methods where possible, then wipe off with a damp, lint free cloth. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.

Treat any knots in wood with an appropriate knotting solution.

Any surface defects should be filled with an appropriate Polycell Trade Polyfilla.

Water-borne coatings can be sensitive to rubber containing plasticisers such as flexible PVC strips. The paint film may partially dissolve due to these plasticisers and become sticky. It is advisable to replace such flexible strips with those made of EPDM rubber. We recommend that you seek the advice of the manufacturers of the strips regarding this problem.

When applying water-based paints to surfaces previously decorated with a conventional solvent-based paint, very thorough surface preparation will be necessary.

Application

To get the best results, ensure the surfaces to be painted are sound, clean, and dry. It is recommended to test a small area of the surface to be painted to ensure compatibility and that you are happy with the finished results.

Stir thoroughly before use.

The normal finishing process is 2 full coats of Dulux Trade Quick Dry Satinwood. Where a strong colour change is involved, a total of 3 coats will be required or when overcoating a factory primed substrate, we recommend that a coat of Dulux Trade Quick dry undercoat is applied.

Newly painted doors and windows should not be closed (tightly) until the paint is fully dry.

To get the best with the Dulux Trade Quick Dry Satinwood, lightly dampen both a synthetic brush and the surface before application to increase flow out.

Airless Spray: A typical recommendation for airless spray application is a minimum working pressure on paint of 133 bars (2000 lb/sq in) with a spray tip size of 0.38mm (15 thou) and a spray tip angle of 65°.

Always follow the manufacturer's instructions found on the tin.