Overview
Dulux Trade Super Grip Primer is specially formulated to provide excellent adhesion to particularly difficult surfaces, both inside and out. This is a single pack primer with no mixing required. It can be applied with a brush, short pile roller, conventional or airless sprayer. Ideal for use on ceramic tiles, melamine, glass, anodised aluminium, aged gloss paint, stove enamel and powder-coated metal. This product is available in white only.
- Excellent adhesion on difficult surfaces
- Can be applied with brush, roller or sprayer
- No mixing necessary
| Area | Interior & Exterior |
| Recommended Use | Difficult surfaces such as Ceramic Tiles, Laminates, Glass |
| Base | Water-Based |
| Coverage | Up to 18m² per litre |
| Drying Time | Touch dry - dependant on temperature and humidity Recoatable - 4-6 Hours |
| Re-Coat Time | 4-6 hours |
| Recommended Coats | 1 Coat |
| Application Method | Brush, Roller, Conventional Spray, Airless Spray |
| VOC Levels | Low |
| Clean Up | Remove as much paint as possible from the equipment before cleaning with water |
Preparation
To get the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry) and free from all defective or poorly adhering material such as efflorescence, dirt, grease or wax.
- Laminates or powder-coated metal should be lightly abraded before applying Dulux Trade Super Grip Primer.
- Where necessary, surfaces should be rubbed down using a suitable abrasive paper and then dusted off (refer to your COSHH Assessment). Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.
Application
Always follow the manufacturers instructions found on the tin, it is recommended that a small test area is applied before painting the entire surface to ensure compatibility.
- Do not apply in temperatures below 8°C.
- If there is direct contact with water in the area, for example shower enclosures, or there is heavy or frequent condensation, a solvent based primer must be used. (This water based primer is not suitable for these areas.)
- Stir well before use. Apply one coat prior to finishing with the appropriate Dulux paint system.
Thinning:
- Brush, roller or airless spray - not required.
- Conventional spray - up to 1 part clean water to 5 parts paint
Spray recommendations
- Conventional Spray - Satisfactory through most equipment. The use of an FF fine spray tip is recommended.
- Airless Spray - Satisfactory through most equipment. The use of an FF fine spray tip is recommended.
