Overview
Available in a variety of colours and ideal for use all year round on exterior walls, Dulux Trade Weathershield All Seasons Smooth Masonry is a flexible, smooth, solvent-based masonry paint based on patented AkzoNobel technology. It is especially suitable for difficult climates, giving up to 15 years lasting protection. Its unique NAD technology provides quick drying and recoat times, even in very cold conditions. It withstands rainfall within 15 minutes of application.
Easy to apply, with excellent opacity, it contains a fungicide to inhibit mould growth on the paint film and is not prone to yellowing.
- 15 year all weather protection
- Can be applied down to 5°C
- Shower resistant in 15 minutes
- Excellent opacity
- Not prone to yellowing
- Can be applied to surfaces pre painted with solvent based paint
Area | Exterior |
Recommended Use | Exterior masonry applied in difficult climates, down to 5 degrees celsius. |
Base | Oil-Based |
Coverage | Up to 14m² per litre |
Drying Time | Touch dry in 30 mins |
Re-Coat Time | 1-2 hours. Drying time will vary according to temperature and humidity and will be significantly longer in cold, damp conditions. |
Recommended Coats | 1-2 Coats |
Application Method | Brush, Roller |
VOC Levels | High |
Clean Up | Remove as much paint as possible from the equipment before cleaning with brush cleaner |
Preparation
For the best results from All Seasons Gloss, make sure surfaces to be painted are sound, clean and dry. It is particularly important that new surfaces are completely dry.
- Remove all loose or defective paint or powdery residues by thorough brushing and scraping, using a stiff fibre brush.
- Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.
- Treat any areas affected by mould, lichens, algae and moss with .
- Make good minor defects with an appropriate filler. Use a sand and cement mix for larger holes and cracks.
- Surfaces that remain powdery, friable or chalky after thorough preparation should be sealed with a coat of .
Note: Do not seal sound new or bare surfaces with stabilising primer. New or sound bare surfaces should be sealed with a thinned first coat of Weathershield All Seasons Smooth Masonry (add up to 1 part white spirit to 10 parts paint).
Application
Always follow the manufacturer's instructions found on the tin.
- Stir thoroughly before use. Seal new or bare surfaces with a thinned first coat of Weathershield All Seasons Smooth Masonry, up to 1 part white spirit to 10 parts paint.
- Apply with a brush or roller only. Do not spray.
- Generally, 2 full coats of Weathershield All Seasons Smooth Masonry are required, but on previously painted surfaces in good condition, where similar colours are used, 1 coat may be enough.
- Dulux Trade All Seasons Gloss has been formulated to allow it to be applied in lower temperatures than normal exterior masonry paints, however, it is not to be used in extremes of temperature (below 5ºC) or during rain, fog or relative humidity above 80%.
Please Note: Coverage on textured surfaces of low porosity, such as pebble dash will have a reduced coverage of 4-6m2 per litre