Overview
Ronseal Ultimate Protection Hardwood Garden Furniture Stain offers three years protection from sun and water damage. It enhances the natural colour of your wood and comes in a variety of natural colours. Formulated to prevent cracking, peeling and splitting and easy to apply.
- Protects hardwood from sun and water damage
- Stops greying and discolouring
- Three year protection
- Rainproof in one hour
Area | Exterior |
Recommended Use | Outdoor garden furniture |
Coverage | Up to 16m² per litre |
Drying Time | 4 Hours |
Re-Coat Time | 4 Hours |
Recommended Coats | 3 Coats |
Application Method | Brush |
VOC Levels | Low |
Preparation
Always ensure the surface to be treated is clean, dry and free from any dust, algae, fungi or moss.
- To clean wood give it a good brush with a stiff brush to remove any dirt, debris or loose wood.
- If the wood has been previously stained, painted or varnished, we recommend you strip it back to the bare wood.
- If your wood has been effected by algae, fungi or moss this must be removed and can be cleaned with products such as .
- Lightly sand the furniture to remove rough splinters we recommend to use a 120 grit sandpaper working in the direction of the grain.
- Wipe the garden furniture with white spirit to ensure any excess grease and dust is removed.
Application
Stir the stain thoroughly, test a small area to ensure you are happy with colour and finish.
- Thoroughly stir the stain.
- Apply with a brush in the direction of the grain.
- Allow to dry for 4 hours.
- For full protection apply three coats leaving four hours between every coat.
- Wait two days to allow the stain to fully dry before using the furniture.
Note: Always follow the manufacturer instructions found on the tin.
Aftercare & Storage
Cleaning
To keep your furniture looking good, regularly wipe it down with a damp cloth to prevent a build-up of dirt.
Maintenance
Three coats will protect your furniture for up to three years but if you notice any damage, just apply another coat to protect it.