Overview
Zinsser Covers Up is a low odour solvent-based aerosol that is a stain killer and touch up paint all in one. Formulated to block and seal most common ceiling stains in a flat white finish that will blend with most acoustic ceiling tiles and white paints. It can be used under and over water and oil based paints.
- Covers water, nicotine, smoke and graffiti
- Low odour
- Non-yellowing
- Perfect spot 'touch up' paint
| Area | Interior |
| Recommended Use | Interior acoustic ceiling tiles or painted ceilings, light fixtures, HVAC ductwork and vents, overhead pipes and conduit, or anywhere an overhead high hiding stain sealing primer or spot finish is needed. |
| Base | Solvent-Based |
| Coverage | Up to 1.5m² per litre |
| Drying Time | 30 Minutes |
| Re-Coat Time | 2 Hours |
| Recommended Coats | 1 Coat |
| Application Method | Aerosol |
Preparation
Always test a small area before application to ensure you are happy with the results.
- Shake can until ball inside rattles, then continue to shake for 1 minute
- Shake periodically during use
- Mask off any surrounding objects
- Spray around 25-30cm from surface
- Apply in short strokes
- When finished clean valve by holding can upside down and spraying until the gas turns clear
Application
Always test a small area before application to ensure you are happy with the results
- Shake can until ball inside rattles, then continue to shake for 1 minute
- Shake periodically during use
- Mask off any surrounding objects
- Spray around 25-30cm from surface
- Apply in short strokes
- When finished clean valve by holding can upside down and spraying until the gas turns clear
Note: Always follow the manufacturer instructions found on the tin.
